hsCRP (High-Sensitive C-Reactive Protein)
Cat. No.: KAI-160
Type: Reagent
Method: Immunoturbidimetric
Format: Liquid
Linearity: 0.20 – 20.0 mg/L (0.020 – 2.00 mg/dL)
Sample Type: Serum, PlasmaKit Composition
R1 (Buffer): 1 × 50 mL
R2 (Antibody): 1 × 10 mL
Tests/Kit: Approx. 200 (based on Hitachi 917; may vary with analyzer)
Intended Use
For the in vitro quantitative determination of C-reactive protein (CRP) in human serum and plasma using automated clinical chemistry analyzers. Measurement of CRP assists in the detection and evaluation of inflammatory disorders, associated diseases, infections, and tissue injury.
FOR IN VITRO DIAGNOSTIC USE ONLY.
Reagent Preparation
Reagents are ready to use and do not require reconstitution.
Physiological saline is required for diluting high CRP samples and serves as the zero calibrator.
Storage & Handling
Store reagents at 2–8°C. Do not freeze. Reagents are stable until the expiration date printed on the label if stored as instructed. Do not mix components from different lots.
Safety Data Sheets
hsCRP Calibrator
Cat. No.: KAI-161C
Type: Calibrator
Kit Composition:
Calibrator 1-4: Human CRP, 4 x 1 mL
Intended Use
The K-ASSAY ® hsCRP Calibrator Set is intended for use of the calibration of the C-reactive protein (CRP) method. For in vitro diagnostic use only
Calibration Preparation
The calibrators are supplied in liquid form. Mix carefully before each use.
Storage and Handling
All calibrators should be stored refrigerated (2-8°C). Return all calibrators to 2-8°C promptly after use. Calibrators can be used for 18 months from the date of manufacturing as indicated on the expiration date on the package and bottle labels
hsCRP Control
Cat. No.: K180C-2M
Type: Control
Kit Composition:
Level 1: Human Serum, 1 x 3 mL, Liquid
Level 2: Human Serum, 1 x 3 mL, Liquid
Intended Use
The K-ASSAY ® hsCRP Control is intended for use as an assayed quality control material for monitoring the performance of C-Reactive Protein (CRP) immunoturbidimetric assays.
FOR IN VITRO DIAGNOSTIC USE.
Control Preparation
1. Gently invert the bottle before use.
2. The control is ready to use.
3. Replace the cap immediately after use to prevent evaporation or contamination.
Storage and Handling
Store controls at 2-8°C. Return all controls to 2-8°C promptly after use. Controls can be used up to the expiration date shown on the vial label and package insert.